In any drive head, there is a tradeoff between torque (power) and speed (revolutions per minute). The high torque head provides a large amount of torque (power) to the auger at a slower speed. The high torque (power) translates into the Dingo's capability to dig 30" holes up to 5' deep in clay, gravel, sandstone and many other conditions where lower torque heads get stuck.

Designed for large auger bits up to 30"

FEATURES

• One Person Bit Change - Any of the Toro Augers can be changed on the head with only one person! The 2 9/16" diameter shaft allows easy fitting of the head to the auger. Most other competitors require two people to change an auger

• Single Directional Pivot - Front to back directional pivot provides the operator with exceptional control when digging with large augers. The single directional pivot prevents the auger from kicking left to right and reduces flailing.

• Horizontal Lockout - The head locks in the horizontal position for usage with the Toro Cement Bowl, Capstand Adapter and more.

• Planetary Gear Drive - The planetary gear drive provides maximum torque at a consistent level. The planetary gear drive also insures the longevity of the power head by transmitting less stress to the hydraulic motor.

Standard Equipment:
Quick Couplers
2- 9/16" round output shaft
Dingo Quick-Attach Mount Plate
Pivot Pins:
1"
Motor - Type:
Eaton 2000 series Gerotor
Displacement: 11.9 cubic inches
Rated Pressure:
3000 psi continuous
Gear Drive - Type:
Auburn Gear Model 6 Planetary
Hoses:
Two high-pressure hoses
Quick Couplers:
Male & Female Flush Face
Measurements:
Length 24"
Width 16"
Height 22"
Weight 176 lbs.
Bit Speed:
54 rpm (@11gpm, 95% eff'cy)
Torque:
1514 ft-lb @3000psi, @11gpm